2 In 1 UC01 : 5 Types of Blades&2 Types of Grinding Sticks

2 In 1 UC01 : 5 Types of Blades&2 Types of Grinding Sticks

2 In 1 Powerful Ultrasonic Cutter & Polisher

Our 2-in-1 Powerful Ultrasonic Cutter and Polisher supports precise cutting, grinding, and polishing.

For commonly used 3D printing materials such as PLA, ABS, PETG, Resin, Nylon, TPU, and others:

  • Cutting Thickness: 1 - 12mm
  • Cutting Speed: Up to 60mm per second
  • Cutting Quality: Produces smooth cuts with minimal melting or distortion.

For harder materials such as hard plastics, metals, gemstones, jewellery, shells and hardwoods:

  • Sanding Speed: Fast and efficient, with results you can see.

  The ultrasonic cutter is fast and effective for polishing small areas. However, due to the small contact area of the polishing stick, it is not ideal for large area polishing where high precision is required.

5 Types of Blades

  Our current range of five blade types is designed to cover almost all daily cutting requirements. Each type of blade gives different cutting results, depending on its design and purpose. Similarly, the cutting speed can vary significantly depending on the material being cut and its properties.

Detailed Introduction to 5 Types of Blades

#2 Blade - 30° Fine Point Blade

  • Regular Standard Blade
  • Can handle virtually all daily cutting needs.
  • Smaller contact surfaces for faster, but less accurate cuts.

#3 Blade - 60° Fine Point Blade

  • Regular Standard Blade
  • Can handle virtually all daily cutting needs.
  • Larger contact surface, slightly slower cutting speed, but higher accuracy and precision.

#4 Blade - 30° Narrow Point Blade

  • Regular Standard Blade
  • Ideal for cutting jobs where space is at a premium.

#5 Blade - Narrow Chisel Blade

  • Special Shaped Blade
  • Ideal for grooving of softer materials.

#6 Blade - Cutting Straight Blade

  • Special Shaped Blade
  • Ideal for large area peeling applications.

Display of the Cutting Materials and Scenes

2 Types of Grinding Sticks

Detailed Introduction to Grinding

#10 Blade - Precision Grinding Stick

  • #600 mesh, it is suitable for grinding hard objects.
  • Common materials such as coins, metal, shells, ceramics, jade, acrylic, plaster, circuit boards, resin, ABS, etc.
  • When grinding softer surfaces such as ABS plastic, try not to apply downward pressure or you will over grind!

Detailed Introduction to Polishing

#11 Blade - Precision Polishing Stick

  • #800 mesh, it is suitable for polishing hard objects.
  • Common materials such as coins, metal, shells, ceramics, jade, acrylic, plaster, circuit boards, resin, ABS, etc.

Display of the Grinding and Polishing

Back to blog
1 of 3

Contact form